Principle:
When the microcurrent mask is fully soaked in water or other solutions, it automatically generates a current, ranging from 0.2 to 2mA.
Steps：
1.Fully soak the microcurrent mask in water or another solution.
2. Set a multimeter to the mA range and place the two electrodes of the multimeter on the two current lines of the mask.
3.Observe the value change on the multimeter.
Even if the mask is cut into any section, the current can still be tested.
Demonstration：
- Prepare a container with a solution and a multimeter.
- Fully submerge the microcurrent mask in the solution.
- Set the multimeter to the mA range.
- Place the two electrodes of the multimeter on the two current lines of the mask.
- Observe the value change on the multimeter.
By following these steps, you can verify that the mask generates a current when soaked in a solution, and even if the mask is cut, the presence of current can still be detected.
Conclusion:
The microcurrent mask cloth generates a current when in contact with water or a solution, and this current can be measured using a multimeter. This verifies the effectiveness and practicality of the microcurrent mask cloth.
Kindly watch the video of the guide of testing current of microcurrent mask cloth:
